TECHNICAL SPECIFICATION
STANDARD ACC.:- 8” CHUCK PLATE, 2 NOS. DEAD CENTER, CENTER ADAPTER, TOOL POST KEY, CHANGE GEARSET ( IN & MM), MOTOR PULLY.
EXTRA STANDARD & ELECTRICALS ACC.:- STEADY REST, FOLLOW REST, FACE PLATE, CHUCK PLATE, CHUCK, ELECTRIC MOTOR, RE. SWITCH, MOTOR V-BELT.
| MODEL |
LDAG01 |
| TYPE OF BED |
Hardened Bed Ways |
| SWING OVER BED |
325 MM |
| HEIGHT OF CENTER |
165 MM |
| WIDTH OF BED |
240 MM |
| SWING OVER CROSS SLIDE |
175 MM |
| SWING IN GAP |
500 MM |
| LENGTH OF GAP IN FRONT OF FACE PLATE |
115 MM |
| NUMBER OF SPINDLE SPEED |
8 |
| TAIL STOCK RAM DIAMETER |
31 MM |
| LEAD SCREW DIAMETER |
22 MM |
| NO. OF SPINDLE SPEEDS |
3 |
| SPINDLE SPEED RANGE |
40 - 1200 RPM |
| SPINDLE BORE |
38 MM |
| SPINDLE NOSE |
Threaded / A2-4 |
| SPINDLE NODE DIAMETER |
61.85 MM |
| SPINDLE THREADS |
8 TPI |
| NO. OF BRITISH THREADS |
44 |
| RANGE OF BRITISH THREADS |
2 to 60 TPI |
| NO. OF METRIC THREADS |
24 |
| RANGE OF METRIC THREADS |
0.5 to 15 MM |
| NO. OF FEEDS |
40 |
| RANGE OF LONGITUDINAL THREADS |
0.066 to 2 MM / Rev. of spindle |
| RANGE OF TRANSVERSE FEEDS |
0.0165 to 0.50 MM / Rev. of spindle |
| LEAD SCREW DIAMETER / PITCH |
25.4 MM / 4 TPI |
| TAIL STOCK SPINDLE DIAMETER |
38.1 MM |
| TAPER IN TAIL STOCK QUILL |
MT-3 |
| CROSS SLIDE TRAVEL |
200 MM |
| COMPOUND SLIDE TRAVEL |
125 MM |
| TAIL STOCK SLEEVE TRAVEL |
120 MM |
| TOOL POST SQUARE |
88 × 88 MM |
| TOOL SHANK SIZE |
19 MM |
| SUITABLE ELECTRICAL HP |
1 HP |
